Roll/Barrel Lift Attachments
ROLL MANIPULATORS
Fork picking up rolls of varied materials from the inside core and lifting/pitching from vertical to horizontal.
Weight Capacity: 300 lbs.
Probe Diameter: 3” (6” adaptor available separately)
Probe Length: 9”
Probe Rotation: 90 degrees from vertical to horizontal
Probe Core Actuation: Electric Gear Motor
Probe Tilt Actuation: Electro-Mechanical Actuator
Operator Control: Via hand held push button pendant with 5 foot long coiled cord
3” JAW STYLE ROLL MANIPULATOR
If the core material of your roll is light weight or thin and will not allow for the eccentric grabbing of the core, the jaw style may be a solution.
Weight Capacity: 150 lbs.
Probe Diameter: 3” or 6”
Probe Length: 9”
Probe Rotation: 90 degrees from vertical to horizontal
Core Retention: 3 hardened steel toothed jaws
Probe Core Actuation: Electric Gear Actuator
Probe Tilt Actuation: Electro-Mechanical Cylinder
Operator Control: Via hand held push button pendant with 5 foot long coiled cord
ROLL/BARREL HANDLERS
Grip/Hug Rolls or Barrels – Turn – Rotate – Dump – Manual or Powered
Light Duty Manual Roll/Barrel Handler:
Weight Capacity: 100 lbs.
Arm Length: 12” or as needed
Actuation: Mechanical slide driven via acme screw and hand wheel
Material: Aluminum and Steel
Standard Duty Manual Roll/Barrel Handler:
Weight Capacity: 300 lbs.
Arm Length: 12” or as needed
Actuation: Mechanical slide driven via acme screw and hand wheel
Material: Aluminum and Steel
Standard Powered Roll Handler:
Weight Capacity: 300 lbs.
Arm Length: 12” or as needed
Actuation: Mechanical slide driven via acme screw and electric gear motor
Grip Actuation: Automatic operation with current sensing grip pressure
Material: Aluminum and Steel
Powered Roll Handler with Powered Rotation:
Weight Capacity: 600 lbs.
Arm Length: 12” or as needed
Actuation: Mechanical slide driven via acme screw and electric gear motor
Grip Actuation: Automatic operation with current sensing grip pressure
Rotation/Actuation: Electric Gear Motor
Material: Aluminum and Steel
Powered Roll Handler with Powered 90 Degree Rotation:
Weight Capacity: 600 lbs.
Arm Length: 12” or as needed
Actuation: Mechanical slide driven via acme screw and electric gear motor
Grip Actuation: Automatic operation with current sensing grip pressure
Grip Control: Current sensing with manual override
Rotation/Actuation: Electric Gear Actuator (90 Degree)
Material: Aluminum and Steel